USE TO PAY EXTRA SHIPPING CHARGES, ONLY WHEN DIRECTED BY JMDualPro STAFF

RS1 One 6 Amp Bank 6 Amps 3.0"H x 4.5"W x 6.5"L 3lbs 12 V Battery Charger

Product Note: The New Recreation Series Product Line Is In Stock And Available For Purchase

Go Charge battery chargers are an affordable, reliable and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier duty and higher amperage product. The system delivers superior value to customers.

Battery Charging Systems Designed for Everyday Applications

• Affordable, Reliable and Safe
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Wide Variety of Applications

May be used in many types of everyday applications including: Bass Boats,
Runabouts, Pontoons, Other Watercraft, Automobiles, ATVs, Golf Carts...

Features of Recreation Series Battery Chargers:

• Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries
• Designed for use in fresh and salt water
• Dependable, rugged construction and waterproof
• Independent outputs and fully automatic
• Battery maintenance mode
• Two year warranty
• DC charge cables = 5ft and AC power cord = 3ft
• approved and meets ISO 8846 Marine standards
• Models available to charge 12-36V systems
• LED lights indicate “Each Battery’s” state of charge
• Reverse polarity protected and no installation restrictions
• Ignition protected (US Coast Guard 33 CFR 183.410)
• FCC 15 Parts A and B Interference Compliant

RS1	One 6 Amp Bank	6 Amps	3.0"H x 4.5"W x 6.5"L	3 lbs.	12V
RS2	Two 6 Amp Banks	12 Amps	3.0"H x 6.5"W x 7.25"L	5 lbs.	12V - 24V
RS3	Three 6 Amp Banks	18 Amps	3.0"H x 6.5"W x 10.25"L	7 lbs.	12V - 36

RS3 Three 6 Amp Banks 18 Amps 3.0"H x 6.5"W x 10.25"L 10lbs 12V-36V Battery Charger

Product Note: The New Recreation Series Product Line Is In Stock And Available For Purchase

Go Charge battery chargers are an affordable, reliable and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier duty and higher amperage product. The system delivers superior value to customers.

Battery Charging Systems Designed for Everyday Applications

• Affordable, Reliable and Safe
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Wide Variety of Applications

May be used in many types of everyday applications including: Bass Boats,
Runabouts, Pontoons, Other Watercraft, Automobiles, ATVs, Golf Carts...

Features of Recreation Series Battery Chargers:

• Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries
• Designed for use in fresh and salt water
• Dependable, rugged construction and waterproof
• Independent outputs and fully automatic
• Battery maintenance mode
• Two year warranty
• DC charge cables = 5ft and AC power cord = 3ft
• approved and meets ISO 8846 Marine standards
• Models available to charge 12-36V systems
• LED lights indicate “Each Battery’s” state of charge
• Reverse polarity protected and no installation restrictions
• Ignition protected (US Coast Guard 33 CFR 183.410)
• FCC 15 Parts A and B Interference Compliant

RS1	One 6 Amp Bank	6 Amps	3.0"H x 4.5"W x 6.5"L	3 lbs.	12V
RS2	Two 6 Amp Banks	12 Amps	3.0"H x 6.5"W x 7.25"L	5 lbs.	12V - 24V
RS3	Three 6 Amp Banks	18 Amps	3.0"H x 6.5"W x 10.25"L	7 lbs.	12V - 36

PS3 Three 15 AMP Banks 45 Amps 6"H x 6.5"W x 14.5"L 22lbs 12V-36V Battery Charger

The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.

Battery Charging System Designed for Use On Land and in Fresh and Salt Water

• The "Green" Charger: Totally "Repairable" Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE - Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Totally Waterproof

May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles...

Product Features

• Approved for Wet Cell and AGM batteries
• Models also available for Gelled Electrolyte batteries
• Designed for use in fresh and saltwater
• Dependable, rugged construction
• Waterproof
• Independent outputs
• Fully automatic / multi stage charging
• Zero spark technology
• Battery maintenance mode
• On-board diagnostic codes
• Temperature compensated
• Advanced microprocessor controlled
• Battery systems available: 12V - 48V
• LED lights indicate the state of charge
• Reverse polarity protected
• No installation restrictions
• FCC Parts A & B interference compliant
• DC charge cables = 5ft. AC power cord = 3ft.
• Approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410

Product Specifications

PS1	One 15-Amp Bank	15 Amps	6"H x 6.5"W x 8.5"L	8 lbs.	12V
PS2	Two 15-Amp Banks	30 Amps	6"H x 6.5"W x 11.5"L	15 lbs.	12V, 24V
PS3	Three 15-Amp Banks	45 Amps	6"H x 6.5"W x 14.5"L	22 lbs.	12V - 36V
PS4	Four 15-Amp Banks	60 Amps	7"H x 6.5"W x 17.5"L	29 lbs.	12V - 48V

All Professional Series units have reverse polarity protection, temperature control, independent outputs and Quick Logic microprocessor capabilities.

Professional Series available in one, two, three and four bank configurations. Please click on the links below to download a product information page in Adobe Acrobat format.

Made in USA

Professional Series Uni Pro - One Bank
Professional Series Dual Pro - Two Bank
Professional Series Tri Pro - Three Bank
Professional Series Quad Pro - Four Bank

RS2 Two 6 Amp Banks 12 Amps 3.0"H x 6.5"W x 7.25"L 5lbs 12V - 24V Battery Charger

Product Note: The New Recreation Series Product Line Is In Stock And Available For Purchase

Go Charge battery chargers are an affordable, reliable and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier duty and higher amperage product. The system delivers superior value to customers.

Battery Charging Systems Designed for Everyday Applications

• Affordable, Reliable and Safe
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Wide Variety of Applications

May be used in many types of everyday applications including: Bass Boats,
Runabouts, Pontoons, Other Watercraft, Automobiles, ATVs, Golf Carts...

Features of Recreation Series Battery Chargers:

• Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries
• Designed for use in fresh and salt water
• Dependable, rugged construction and waterproof
• Independent outputs and fully automatic
• Battery maintenance mode
• Two year warranty
• DC charge cables = 5ft and AC power cord = 3ft
• approved and meets ISO 8846 Marine standards
• Models available to charge 12-36V systems
• LED lights indicate “Each Battery’s” state of charge
• Reverse polarity protected and no installation restrictions
• Ignition protected (US Coast Guard 33 CFR 183.410)
• FCC 15 Parts A and B Interference Compliant

RS1	One 6 Amp Bank	6 Amps	3.0"H x 4.5"W x 6.5"L	3 lbs.	12V
RS2	Two 6 Amp Banks	12 Amps	3.0"H x 6.5"W x 7.25"L	5 lbs.	12V - 24V
RS3	Three 6 Amp Banks	18 Amps	3.0"H x 6.5"W x 10.25"L	7 lbs.	12V - 36

CRS2 Two Banks Engine Output 4.0”H x 6.0”W x 5.5”L 4.0 lbs. 12V, 24V Battery Charger

Charge On The Run is a revolutionary product that has proven to be an important advantage to serious boaters everywhere. This unit utilizes boat engine charging current to charge auxiliary batteries while the engine is running. There are no connections to the ignition system or engine. Just connect to the starting and auxiliary batteries. Provides up to 30% more battery time on the water. The unit is fully waterproof with reverse polarity and short circuit protection.

Battery Charging System Designed for Use On Land and in Fresh and Salt Water

• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE—Fast and Easy Installation
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Totally Waterproof
• Wide Variety of Applications
Features of Charge On The Run
• Fast and easy installation
• Dependable, rugged and light weight construction
• Fully automatic shut off
• Advanced microprocessor controlled
• Waterproof
• Ignition protected
• Decreases overnight charge time
• Reverse polarity protected
• FCC 15 Parts A & B interference compliant
• approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410)
• DC charge cable = 5 ft.
• Battery systems available: 12V - 36V

Made in USA

SS2 Two 10 Amp Banks 20 Amps 5”H x 8”W x 9.5”L 10 lbs. 12V Battery Charger

Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use.

Battery Charging System Designed for Use On Land and in Fresh and Salt Water

• The ”Green” Charger: Totally “Repairable” Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Totally Waterproof

May be used in many types of sporting applications including: Inland Watercraft,
Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles...

• Features of the Sportsman Series Battery Chargers:
• Approved for Wet Cell and AGM batteries
• Models also available for Gelled Electrolyte batteries
• Designed for use in fresh and saltwater
• Dependable, rugged construction
• Waterproof
• Independent outputs
• Fully automatic / multi stage charging
• Zero spark technology
• Battery maintenance mode
• On-board diagnostic codes
• Temperature compensated
• Advanced microprocessor controlled
• Battery systems available: 12V – 48V
• LED lights indicate the state of charge
• Reverse polarity protected
• No installation restrictions
• FCC Parts A & B interference compliant
• DC charge cables = 5ft. AC power cord = 3ft.
• approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410)

SS1	One 10 Amp Bank	10 Amps	5"H x 8"W x 6.5"L	6lbs	12V
SS2	Two 10 Amp Banks	20 Amps	5"H x 8"W x 9.5"L	10lbs	12V-24V
SS3	Three 10 Amp Banks	30 Amps	5"H x 8"W x 11.5"L	14lbs	12-24V
SS4	Four 10 Amps Banks	40 Amps	5"H x 8"W x 13.5"	18Lbs	12V-48V

SS3 Three 10 Amp Banks 30 Amps 5”H x 8”W x 11.5”L 14 lbs. 12-24V Battery Charger

Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use.

Battery Charging System Designed for Use On Land and in Fresh and Salt Water

• The ”Green” Charger: Totally “Repairable” Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Totally Waterproof

May be used in many types of sporting applications including: Inland Watercraft,
Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles...

• Features of the Sportsman Series Battery Chargers:
• Approved for Wet Cell and AGM batteries
• Models also available for Gelled Electrolyte batteries
• Designed for use in fresh and saltwater
• Dependable, rugged construction
• Waterproof
• Independent outputs
• Fully automatic / multi stage charging
• Zero spark technology
• Battery maintenance mode
• On-board diagnostic codes
• Temperature compensated
• Advanced microprocessor controlled
• Battery systems available: 12V – 48V
• LED lights indicate the state of charge
• Reverse polarity protected
• No installation restrictions
• FCC Parts A & B interference compliant
• DC charge cables = 5ft. AC power cord = 3ft.
• approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410)

SS1	One 10 Amp Bank	10 Amps	5"H x 8"W x 6.5"L	6lbs	12V
SS2	Two 10 Amp Banks	20 Amps	5"H x 8"W x 9.5"L	10lbs	12V-24V
SS3	Three 10 Amp Banks	30 Amps	5"H x 8"W x 11.5"L	14lbs	12-24V
SS4	Four 10 Amps Banks	40 Amps	5"H x 8"W x 13.5"	18Lbs	12V-48V

PS2 Two 15 AMP Banks 30 Amps 6"H x 6.5"W x 11.5"L 15lbs 12V, 24V Battery Charger

The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.

Battery Charging System Designed for Use On Land and in Fresh and Salt Water

• The "Green" Charger: Totally "Repairable" Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE - Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Totally Waterproof

May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles...

Product Features

• Approved for Wet Cell and AGM batteries
• Models also available for Gelled Electrolyte batteries
• Designed for use in fresh and saltwater
• Dependable, rugged construction
• Waterproof
• Independent outputs
• Fully automatic / multi stage charging
• Zero spark technology
• Battery maintenance mode
• On-board diagnostic codes
• Temperature compensated
• Advanced microprocessor controlled
• Battery systems available: 12V - 48V
• LED lights indicate the state of charge
• Reverse polarity protected
• No installation restrictions
• FCC Parts A & B interference compliant
• DC charge cables = 5ft. AC power cord = 3ft.
• Approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410

Product Specifications

PS1	One 15-Amp Bank	15 Amps	6"H x 6.5"W x 8.5"L	8 lbs.	12V
PS2	Two 15-Amp Banks	30 Amps	6"H x 6.5"W x 11.5"L	15 lbs.	12V, 24V
PS3	Three 15-Amp Banks	45 Amps	6"H x 6.5"W x 14.5"L	22 lbs.	12V - 36V
PS4	Four 15-Amp Banks	60 Amps	7"H x 6.5"W x 17.5"L	29 lbs.	12V - 48V

All Professional Series units have reverse polarity protection, temperature control, independent outputs and Quick Logic microprocessor capabilities.

Professional Series available in one, two, three and four bank configurations. Please click on the links below to download a product information page in Adobe Acrobat format.

Made in USA

Professional Series Uni Pro - One Bank
Professional Series Dual Pro - Two Bank
Professional Series Tri Pro - Three Bank
Professional Series Quad Pro - Four Bank

PS4 Four 15 AMP Bank 60 Amps 6"H x 6.5"W x 17.5"L 29lbs 12V- 48V Battery Charger

The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.

Battery Charging System Designed for Use On Land and in Fresh and Salt Water

• The "Green" Charger: Totally "Repairable" Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE - Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Totally Waterproof

May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles...

Product Features

• Approved for Wet Cell and AGM batteries
• Models also available for Gelled Electrolyte batteries
• Designed for use in fresh and saltwater
• Dependable, rugged construction
• Waterproof
• Independent outputs
• Fully automatic / multi stage charging
• Zero spark technology
• Battery maintenance mode
• On-board diagnostic codes
• Temperature compensated
• Advanced microprocessor controlled
• Battery systems available: 12V - 48V
• LED lights indicate the state of charge
• Reverse polarity protected
• No installation restrictions
• FCC Parts A & B interference compliant
• DC charge cables = 5ft. AC power cord = 3ft.
• Approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410

Product Specifications

PS1	One 15-Amp Bank	15 Amps	6"H x 6.5"W x 8.5"L	8 lbs.	12V
PS2	Two 15-Amp Banks	30 Amps	6"H x 6.5"W x 11.5"L	15 lbs.	12V, 24V
PS3	Three 15-Amp Banks	45 Amps	6"H x 6.5"W x 14.5"L	22 lbs.	12V - 36V
PS4	Four 15-Amp Banks	60 Amps	7"H x 6.5"W x 17.5"L	29 lbs.	12V - 48V

All Professional Series units have reverse polarity protection, temperature control, independent outputs and Quick Logic microprocessor capabilities.

Professional Series available in one, two, three and four bank configurations. Please click on the links below to download a product information page in Adobe Acrobat format.

Made in USA

Professional Series Uni Pro - One Bank
Professional Series Dual Pro - Two Bank
Professional Series Tri Pro - Three Bank
Professional Series Quad Pro - Four Bank

15 Ft. Cable Extension

Charge Cable Extensions Are 100% Compatible With Most Battery Chargers

• Available in 5’, 10’ and 15’ Lengths
• Affordable, Reliable and Safe
• TROUBLE FREE—Fast and Easy Installation
• Wide Variety of Applications

Installation in Three Easy Steps

Step 1. Join cables with quick and sure connectors (No Crimping)
Step 2: Seal individual connections with pliable heat shrink
Step 3: Seal entire connection with another layer of heat shrink

Features of Pro Charging System’s Charge Cable Extensions

• Fast and easy installation
• Strong and sure connectors
• Dual fused for ultimate safety
• Connection protected by double layer of heat shrink
• Sealed cable connections provide ultimate corrosion resistance
• Minimizes voltage drop from spliced cables
• Heavy 14 gauge wire cable assembly
• The safest way to extend charge cables
• Meets Marine ABYC standards

Each package Includes:

• One (+/–) charge cable
• Heat shrink material
• All hardware and instructions

SS1 One 10 Amp Bank 10 Amps 5”H x 8”W x 6.5”L 6 lbs. 12V Battery Charger

Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use.

Battery Charging System Designed for Use On Land and in Fresh and Salt Water

• The ”Green” Charger: Totally “Repairable” Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Totally Waterproof

May be used in many types of sporting applications including: Inland Watercraft,
Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles...

• Features of the Sportsman Series Battery Chargers:
• Approved for Wet Cell and AGM batteries
• Models also available for Gelled Electrolyte batteries
• Designed for use in fresh and saltwater
• Dependable, rugged construction
• Waterproof
• Independent outputs
• Fully automatic / multi stage charging
• Zero spark technology
• Battery maintenance mode
• On-board diagnostic codes
• Temperature compensated
• Advanced microprocessor controlled
• Battery systems available: 12V – 48V
• LED lights indicate the state of charge
• Reverse polarity protected
• No installation restrictions
• FCC Parts A & B interference compliant
• DC charge cables = 5ft. AC power cord = 3ft.
• approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410)

SS1	One 10 Amp Bank	10 Amps	5"H x 8"W x 6.5"L	6lbs	12V
SS2	Two 10 Amp Banks	20 Amps	5"H x 8"W x 9.5"L	10lbs	12V-24V
SS3	Three 10 Amp Banks	30 Amps	5"H x 8"W x 11.5"L	14lbs	12-24V
SS4	Four 10 Amps Banks	40 Amps	5"H

PS1 One 15 AMP Bank 15 Amps 6"H x 6.5"W x 8.5"L 8lbs 12V Battery Charger

The Professional Series chargers have set the standard in the marine industry for more than a decade. They are known as the safest, most reliable, and best performing battery chargers in the industry. Across a broad range of fishing and recreational boats, Pro Charging Systems keeps boaters on the water longer while extending the life of their batteries. Dual ProTM charging technology has been and continues to be the choice of over 50 boat manufacturers and professional fishermen on the B.A.S.S. and FLW tournament circuit.

Battery Charging System Designed for Use On Land and in Fresh and Salt Water

• The "Green" Charger: Totally "Repairable" Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE - Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Totally Waterproof

May be used in many types of sporting applications including: Inland Watercraft, Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles...

Product Features

• Approved for Wet Cell and AGM batteries
• Models also available for Gelled Electrolyte batteries
• Designed for use in fresh and saltwater
• Dependable, rugged construction
• Waterproof
• Independent outputs
• Fully automatic / multi stage charging
• Zero spark technology
• Battery maintenance mode
• On-board diagnostic codes
• Temperature compensated
• Advanced microprocessor controlled
• Battery systems available: 12V - 48V
• LED lights indicate the state of charge
• Reverse polarity protected
• No installation restrictions
• FCC Parts A & B interference compliant
• DC charge cables = 5ft. AC power cord = 3ft.
• Approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410

Product Specifications

PS1	One 15-Amp Bank	15 Amps	6"H x 6.5"W x 8.5"L	8 lbs.	12V
PS2	Two 15-Amp Banks	30 Amps	6"H x 6.5"W x 11.5"L	15 lbs.	12V, 24V
PS3	Three 15-Amp Banks	45 Amps	6"H x 6.5"W x 14.5"L	22 lbs.	12V - 36V
PS4	Four 15-Amp Banks	60 Amps	7"H x 6.5"W x 17.5"L	29 lbs.	12V - 48V

All Professional Series units have reverse polarity protection, temperature control, independent outputs and Quick Logic microprocessor capabilities.

Professional Series available in one, two, three and four bank configurations. Please click on the links below to download a product information page in Adobe Acrobat format.

Made in USA

Professional Series Uni Pro - One Bank
Professional Series Dual Pro - Two Bank
Professional Series Tri Pro - Three Bank
Professional Series Quad Pro - Four Bank

10 Ft. Cable Extension

Charge Cable Extensions Are 100% Compatible With Most Battery Chargers

• Available in 5’, 10’ and 15’ Lengths
• Affordable, Reliable and Safe
• TROUBLE FREE—Fast and Easy Installation
• Wide Variety of Applications

Installation in Three Easy Steps

Step 1. Join cables with quick and sure connectors (No Crimping)
Step 2: Seal individual connections with pliable heat shrink
Step 3: Seal entire connection with another layer of heat shrink

Features of Pro Charging System’s Charge Cable Extensions

• Fast and easy installation
• Strong and sure connectors
• Dual fused for ultimate safety
• Connection protected by double layer of heat shrink
• Sealed cable connections provide ultimate corrosion resistance
• Minimizes voltage drop from spliced cables
• Heavy 14 gauge wire cable assembly
• The safest way to extend charge cables
• Meets Marine ABYC standards

Each package Includes:

• One (+/–) charge cable
• Heat shrink material
• All hardware and instructions

Marinco 150 BBI

Marine On-Board Charger Inlet 125V

Black - To be hard wired to our on-board battery chargers.

5 Ft. Cable Extension

Charge Cable Extensions Are 100% Compatible With Most Battery Chargers

• Available in 5’, 10’ and 15’ Lengths
• Affordable, Reliable and Safe
• TROUBLE FREE—Fast and Easy Installation
• Wide Variety of Applications

Installation in Three Easy Steps

Step 1. Join cables with quick and sure connectors (No Crimping)
Step 2: Seal individual connections with pliable heat shrink
Step 3: Seal entire connection with another layer of heat shrink

Features of Pro Charging System’s Charge Cable Extensions

• Fast and easy installation
• Strong and sure connectors
• Dual fused for ultimate safety
• Connection protected by double layer of heat shrink
• Sealed cable connections provide ultimate corrosion resistance
• Minimizes voltage drop from spliced cables
• Heavy 14 gauge wire cable assembly
• The safest way to extend charge cables
• Meets Marine ABYC standards

Each package Includes:

• One (+/–) charge cable
• Heat shrink material
• All hardware and instructions

Hold your battery chargers plug in place. Convenient and easy to use.

These 30 Amp fuses are designed specifically for use with Pro Charging Systems/Dual Pro charge cable extensions. Each pack contains 10 fuses.

CRS1 One Bank Engine Output 4.0”H x 6.0”W x 5.5”L 4.0 lbs. 12V Battery Charger

Charge On The Run is a revolutionary product that has proven to be an important advantage to serious boaters everywhere. This unit utilizes boat engine charging current to charge auxiliary batteries while the engine is running. There are no connections to the ignition system or engine. Just connect to the starting and auxiliary batteries. Provides up to 30% more battery time on the water. The unit is fully waterproof with reverse polarity and short circuit protection.

Battery Charging System Designed for Use On Land and in Fresh and Salt Water

• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE—Fast and Easy Installation
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Totally Waterproof
• Wide Variety of Applications
Features of Charge On The Run
• Fast and easy installation
• Dependable, rugged and light weight construction
• Fully automatic shut off
• Advanced microprocessor controlled
• Waterproof
• Ignition protected
• Decreases overnight charge time
• Reverse polarity protected
• FCC 15 Parts A & B interference compliant
• approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410)
• DC charge cable = 5 ft.
• Battery systems available: 12V - 36V

Made in USA

Introducing The Most Advanced and Reliable Battery Fuel Gauge

• Accurately Displays Battery Pack State
• Utilizes Advanced Firmware
• Intelligently Detects Battery Pack Charge Status
• TROUBLE FREE — Easy Installation - Connect It and Forget It!
• Advanced Microprocessor Constantly Evaluates Battery Pack State
• Thin Design, Durable, Water Resistant - Made in the USA and Built To Last

May be used in many types of applications including: Golf Carts, Hunting Buggies Electric Utility Vehicles, LSVs, Aerial Lifts, Lift Trucks, Scrubbers, Lawn Equipment, Emergency Vehicles, Boats and More...

The battery fuel gauge solves one of the most common complaints about battery status indicators currently on the market today. Most battery status indicators are not accurate and many are not reliable. Many employ old technologies. The new Pro Charging Systems Battery Fuel Gauge changes the paradigm. Think the old “Motorola Brick Phone” from the late 1980’s versus today’s I-Phone. The new Pro Charging System (PCS) battery fuel gauge measures the battery’s energy state with precision and accurately displays the information more like a traditional fuel gauge. The display is easy to read and understand. In addition, the installation of the product is quite simple. Since the system utilizes intuitive technology, it fits and adapts to a wide range of applications. We take great pride in the performance, quality and versatility of our products backed by exceptional customer service.

Features of the Battery Fuel Gauge:

• Twelve LED array shows level of battery pack depletion
• LED array displays the level of charging for the battery pack
• Low Battery Voltage LED Indicator - Red indicator flashes warning and stays on when charging is required
• An audible low battery voltage warning is optional
• Status self-adjusts while charging is in progress
• Rugged PC ABS polymer case/Water resistant design
• For use with Lead Acid (Wet/AGM) batteries

Model Description Weight Size Sample Battery Configuration
BFG 12V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 12V System Configuration - 1-12V Battery, 2-6V Batteries
BFG 24V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 24V System Configuration - 2-12V Batteries, 4-6V Batteries
BFG 36V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 36V System Configuration - 3-12V Batteries, 6-6V Batteries
BFG 48V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 48V System Configuration - 4-12V Batteries, 8-6V Batteries, 6-8V Batteries
BFG 64V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 64V System Configuration - 8-8V Batteries
BFG 72V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 72V System Configuration - 6-12V Batteries, 9-8V Batteries,12-6V Batteries

SS4 Four 10 Amp Banks 40 Amps 5”H x 8”W x 8”L 18 lbs. 12V-48V Battery Charger

Our customers asked for a series of chargers that were smaller, lighter and economically affordable. The Sportsman Series of chargers answers these needs. This line of chargers is designed for all types of battery applications. Sportsman chargers have all the safety and reliability features that have made PRO Charging Systems chargers the #1 choice of most boat manufacturers, dealers and over 750,000 customers across the country. Advanced microprocessors and LED readings make the units even easier to use.

Battery Charging System Designed for Use On Land and in Fresh and Salt Water

• The ”Green” Charger: Totally “Repairable” Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Totally Waterproof

May be used in many types of sporting applications including: Inland Watercraft,
Salt Water Watercraft, Motorcycles, Golf Carts, Utility Vehicles...

• Features of the Sportsman Series Battery Chargers:
• Approved for Wet Cell and AGM batteries
• Models also available for Gelled Electrolyte batteries
• Designed for use in fresh and saltwater
• Dependable, rugged construction
• Waterproof
• Independent outputs
• Fully automatic / multi stage charging
• Zero spark technology
• Battery maintenance mode
• On-board diagnostic codes
• Temperature compensated
• Advanced microprocessor controlled
• Battery systems available: 12V – 48V
• LED lights indicate the state of charge
• Reverse polarity protected
• No installation restrictions
• FCC Parts A & B interference compliant
• DC charge cables = 5ft. AC power cord = 3ft.
• approved and meets ISO 8846 Marine standards
• Ignition protected (US Coast Guard 33 CFR 183.410)

SS1	One 10 Amp Bank	10 Amps	5"H x 8"W x 6.5"L	6lbs	12V
SS2	Two 10 Amp Banks	20 Amps	5"H x 8"W x 9.5"L	10lbs	12V-24V
SS3	Three 10 Amp Banks	30 Amps	5"H x 8"W x 11.5"L	14lbs	12-24V
SS4	Four 10 Amps Banks	40 Amps	5"H x 8"W x 13.5"	18Lbs	12V-48V

GC122 Maintainer/Battery Trickle Charger 2.0 Amps 1.625”H” x 1.75”W x 3.875”L

Battery Tender

Product Note: This is a new product and is now available for delivery!

Go Charge battery chargers are an affordable, reliable and safe battery charging system designed for everyday use. The system is engineered for users who need a charging system on an occasional basis and may not want or need the capabilities of a heavier duty and higher amperage product. The system delivers superior value to customers.

Battery Charging Systems Designed for Everyday Applications

• Battery Maintainer and Charger
• Affordable, Reliable and Safe
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Wide Variety of Applications

May be used in many types of everyday applications including: Automobiles,
ATVs, Golf Carts, Lawn Mowers, Motorcycles, Watercraft, Snowmobiles...

Features of Go Charge Battery Chargers:

• State of charge LED indicator
• Reverse polarity protected
• Zero spark technology
• Includes power cord and fused harness
• 1 year warranty
• Conforms to UL/CUL specifications
• Four (4) stage charge profile
• Both alligator clips and ring terminals included
• approved
• Over voltage and over current protection
• Universal input
• Quick disconnect harness connection
• Flexible rotating A/C power plug

GC122 Maintainer/Charger 2.0 Amps 1.625”H” x 1.75”W x 3.875”L

Pro Charging Systems : Golf/Utility Cart - Crowfoot Connector 607

Introducing The Most Advanced and Reliable Battery Fuel Gauge

• Accurately Displays Battery Pack State
• Utilizes Advanced Firmware
• Intelligently Detects Battery Pack Charge Status
• TROUBLE FREE — Easy Installation - Connect It and Forget It!
• Advanced Microprocessor Constantly Evaluates Battery Pack State
• Thin Design, Durable, Water Resistant - Made in the USA and Built To Last

May be used in many types of applications including: Golf Carts, Hunting Buggies Electric Utility Vehicles, LSVs, Aerial Lifts, Lift Trucks, Scrubbers, Lawn Equipment, Emergency Vehicles, Boats and More...

The battery fuel gauge solves one of the most common complaints about battery status indicators currently on the market today. Most battery status indicators are not accurate and many are not reliable. Many employ old technologies. The new Pro Charging Systems Battery Fuel Gauge changes the paradigm. Think the old “Motorola Brick Phone” from the late 1980’s versus today’s I-Phone. The new Pro Charging System (PCS) battery fuel gauge measures the battery’s energy state with precision and accurately displays the information more like a traditional fuel gauge. The display is easy to read and understand. In addition, the installation of the product is quite simple. Since the system utilizes intuitive technology, it fits and adapts to a wide range of applications. We take great pride in the performance, quality and versatility of our products backed by exceptional customer service.

Features of the Battery Fuel Gauge:

• Twelve LED array shows level of battery pack depletion
• LED array displays the level of charging for the battery pack
• Low Battery Voltage LED Indicator - Red indicator flashes warning and stays on when charging is required
• An audible low battery voltage warning is optional
• Status self-adjusts while charging is in progress
• Rugged PC ABS polymer case/Water resistant design
• For use with Lead Acid (Wet/AGM) batteries

Model Description Weight Size Sample Battery Configuration
BFG 12V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 12V System Configuration - 1-12V Battery, 2-6V Batteries
BFG 24V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 24V System Configuration - 2-12V Batteries, 4-6V Batteries
BFG 36V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 36V System Configuration - 3-12V Batteries, 6-6V Batteries
BFG 48V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 48V System Configuration - 4-12V Batteries, 8-6V Batteries, 6-8V Batteries
BFG 64V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 64V System Configuration - 8-8V Batteries
BFG 72V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 72V System Configuration - 6-12V Batteries, 9-8V Batteries,12-6V Batteries

Use this option to Add Alligator Clip Leads to Stock Charger

Special orders take an additional 3 to 5 business days to complete.

REMINDER - ADD ONE SPECIAL ORDER OPTION PER BANK - SO IF YOU ARE ORDERING A 2 BANK CHARGER AND WANT THE SPECIAL ORDER ON BOTH BANKS - ADD (2) TWO UNITS.

IS1 - One 6 Amp Bank - 6 Amps - 3.0"H x 4.5"W x 6.5"L - 3 lbs - 12 V

PCS Industrial Series battery chargers are an affordable, reliable and safe battery charging system designed for everyday use. The system is engineered for users who need a dependable charging system who may not want or need the capabilities of a heavier duty and higher amperage product. The system delivers superior value to customers.

Battery Charging Systems Designed for Everyday Applications

• Affordable, Reliable and Safe
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Wide Variety of Applications

Features of Recreation Series Battery Chargers:

• Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries
• Designed for use in a variety of industrial applications
• Dependable, rugged construction and waterproof
• Independent outputs and fully automatic
• Battery maintenance mode
• DC charge cables = 5ft and AC power cord = 3ft
• Approved and meets ISO 8846 Marine standards
• Models available to charge 12-36V systems
• LED lights indicate “Each Battery’s” state of charge
• Reverse polarity protected and no installation restrictions
• Ignition protected (US Coast Guard 33 CFR 183.410)
• FCC 15 Parts A and B Interference Compliant

IS2 - Two 6 Amp Banks - 12 Amps - 3.0"H x 4.5"W x 6.5"L - 5 lbs - 12 V

PCS Industrial Series battery chargers are an affordable, reliable and safe battery charging system designed for everyday use. The system is engineered for users who need a dependable charging system who may not want or need the capabilities of a heavier duty and higher amperage product. The system delivers superior value to customers.

Battery Charging Systems Designed for Everyday Applications

• Affordable, Reliable and Safe
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Wide Variety of Applications

Features of Recreation Series Battery Chargers:

• Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries
• Designed for use in a variety of industrial applications
• Dependable, rugged construction and waterproof
• Independent outputs and fully automatic
• Battery maintenance mode
• DC charge cables = 5ft and AC power cord = 3ft
• Approved and meets ISO 8846 Marine standards
• Models available to charge 12-36V systems
• LED lights indicate “Each Battery’s” state of charge
• Reverse polarity protected and no installation restrictions
• Ignition protected (US Coast Guard 33 CFR 183.410)
• FCC 15 Parts A and B Interference Compliant

RS1	One 6 Amp Bank	6 Amps	3.0"H x 4.5"W x 6.5"L	3 lbs.	12V
RS2	Two 6 Amp Banks	12 Amps	3.0"H x 6.5"W x 7.25"L	5 lbs.	12V - 24V
RS3	Three 6 Amp Banks	18 Amps	3.0"H x 6.5"W x 10.25"L	7 lbs.	12V - 36V

i3625     25 Amps     5.6”H x 8.5”W x 10.9”L    28 lbs.     36V Battery Charger

Eagle Performance Series chargers are specially designed for use in the industrial and electric vehicle markets. With over 18 years of experience in manufacturing the legendary Dual ProTM charging systems, Pro Charging Systems chargers have become known as the name in charging technologies. We pride ourselves on the performance and versatility of our products and our outstanding customer service. We are proud that these safe, reliable, and efficient battery chargers are made in the USA.

Battery Charging System Designed for the Demands of Recreational and Industrial Use

• The ”Green” Charger: Totally “Repairable” Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Water Resistant

May be used in many types of sporting applications including: Golf Carts, Lift Trucks,
Scrubbers, Electric Utility Vehicles, Lawn Equipment, Industrial Signs...

Features of the Eagle Performance Series Portable Battery Chargers:

• For use with Lead Acid (Wet/AGM) batteries
• Easily reconfigured for Gelled Electrolyte batteries
• Battery type LED indicator
• Designed for tough duty applications
• Dependable, rugged construction
• Exclusive temperature compensation
• Water resistant
• Fully automatic with float maintenance
• Reverse polarity spark free operation
• Return to charge maintenance mode
• Exclusive on board diagnostics
• High visibility, easy to read charge indicators
• Fan cooled
• Optional “Universal” A/C input

i2412	12 Amps	5.5"H x 7.0"W x 8.0L	18lbs.	24V
i3612	12 Amps	5.5"H x 7.0"W x 8.0L	18lbs	36V
i4809	9 Amps	5.5"H x 7.0"W x 8.0L	18lbs	48V
i2425	25 Amps	5.6"H x 8.5" W x 10.9" L	28lbs	24V
i3625	25 Amps	5.6"H x 8.5" W x  10.9" L	28lbs	36V
i4818	18 Amps	5.6"H x 8.5" W x 10.9" L	28lbs	48V

IS3 - Three 6 Amp Banks - 18 Amps - 3.0"H x 4.5"W x 6.5"L - 7 lbs - 12 V

PCS Industrial Series battery chargers are an affordable, reliable and safe battery charging system designed for everyday use. The system is engineered for users who need a dependable charging system who may not want or need the capabilities of a heavier duty and higher amperage product. The system delivers superior value to customers.

Battery Charging Systems Designed for Everyday Applications

• Affordable, Reliable and Safe
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Wide Variety of Applications

Features of Recreation Series Battery Chargers:

• Approved for Wet Cell and Absorbed Glass Mat (AGM) batteries
• Designed for use in a variety of industrial applications
• Dependable, rugged construction and waterproof
• Independent outputs and fully automatic
• Battery maintenance mode
• DC charge cables = 5ft and AC power cord = 3ft
• Approved and meets ISO 8846 Marine standards
• Models available to charge 12-36V systems
• LED lights indicate “Each Battery’s” state of charge
• Reverse polarity protected and no installation restrictions
• Ignition protected (US Coast Guard 33 CFR 183.410)
• FCC 15 Parts A and B Interference Compliant

RS1	One 6 Amp Bank	6 Amps	3.0"H x 4.5"W x 6.5"L	3 lbs.	12V
RS2	Two 6 Amp Banks	12 Amps	3.0"H x 6.5"W x 7.25"L	5 lbs.	12V - 24V
RS3	Three 6 Amp Banks	18 Amps	3.0"H x 6.5"W x 10.25"L	7 lbs.	12V - 36V

Introducing The Most Advanced and Reliable Battery Fuel Gauge

• Accurately Displays Battery Pack State
• Utilizes Advanced Firmware
• Intelligently Detects Battery Pack Charge Status
• TROUBLE FREE — Easy Installation - Connect It and Forget It!
• Advanced Microprocessor Constantly Evaluates Battery Pack State
• Thin Design, Durable, Water Resistant - Made in the USA and Built To Last

May be used in many types of applications including: Golf Carts, Hunting Buggies Electric Utility Vehicles, LSVs, Aerial Lifts, Lift Trucks, Scrubbers, Lawn Equipment, Emergency Vehicles, Boats and More...

The battery fuel gauge solves one of the most common complaints about battery status indicators currently on the market today. Most battery status indicators are not accurate and many are not reliable. Many employ old technologies. The new Pro Charging Systems Battery Fuel Gauge changes the paradigm. Think the old “Motorola Brick Phone” from the late 1980’s versus today’s I-Phone. The new Pro Charging System (PCS) battery fuel gauge measures the battery’s energy state with precision and accurately displays the information more like a traditional fuel gauge. The display is easy to read and understand. In addition, the installation of the product is quite simple. Since the system utilizes intuitive technology, it fits and adapts to a wide range of applications. We take great pride in the performance, quality and versatility of our products backed by exceptional customer service.

Features of the Battery Fuel Gauge:

• Twelve LED array shows level of battery pack depletion
• LED array displays the level of charging for the battery pack
• Low Battery Voltage LED Indicator - Red indicator flashes warning and stays on when charging is required
• An audible low battery voltage warning is optional
• Status self-adjusts while charging is in progress
• Rugged PC ABS polymer case/Water resistant design
• For use with Lead Acid (Wet/AGM) batteries

Model Description Weight Size Sample Battery Configuration
BFG 12V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 12V System Configuration - 1-12V Battery, 2-6V Batteries
BFG 24V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 24V System Configuration - 2-12V Batteries, 4-6V Batteries
BFG 36V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 36V System Configuration - 3-12V Batteries, 6-6V Batteries
BFG 48V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 48V System Configuration - 4-12V Batteries, 8-6V Batteries, 6-8V Batteries
BFG 64V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 64V System Configuration - 8-8V Batteries
BFG 72V Battery Fuel Gauge 8 oz. 0.35”H x 3.85”W x 2.40”L 72V System Configuration - 6-12V Batteries, 9-8V Batteries,12-6V Batteries

Use this option to order an Extended Power Cord - factory installed on your stock charger. Note in the comment section how long (up to 10 feet) you need your Extended Power Cord to be.

Special orders take an additional 3 to 5 business days to complete.

i2425     25 Amps     5.75”H x 7.375”W x 8.5”L     28 lbs.     24V Battery Charger

Eagle Performance Series chargers are specially designed for use in the industrial and electric vehicle markets. With over 18 years of experience in manufacturing the legendary Dual ProTM charging systems, Pro Charging Systems chargers have become known as the name in charging technologies. We pride ourselves on the performance and versatility of our products and our outstanding customer service. We are proud that these safe, reliable, and efficient battery chargers are made in the USA.

Battery Charging System Designed for the Demands of Recreational and Industrial Use

The ”Green” Charger: Totally “Repairable” Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Water Resistant
May be used in many types of sporting applications including: Golf Carts, Lift Trucks,
Scrubbers, Electric Utility Vehicles, Lawn Equipment, Industrial Signs...

Features of the Eagle Performance Series On-Board Battery Chargers:

• For use with Lead Acid (Wet/AGM) batteries
• Easily reconfigured for Gelled Electrolyte batteries
• Battery type LED indicator
• Designed for tough duty applications
• Dependable, rugged construction
• Exclusive temperature compensation
• Water resistant
• Fully automatic with float maintenance
• Reverse polarity spark free operation
• Return to charge maintenance mode
• Exclusive on board diagnostics
• High visibility, easy to read charge indicators
• Fan cooled
• Optional “Universal” A/C input

i2425     25 Amps     5.75”H x 7.375”W x 8.5”L     28 lbs.     24V
i3625     25 Amps     5.75”H x 7.375”W x 8.5”L     28 lbs.     36V
i4818     18 Amps     5.75”H x 7.375”W x 8.5”L     28 lbs.     48V

i2425     25 Amps     5.6”H x 8.5”W x 10.9”L    28 lbs.    24V Battery Charger

Eagle Performance Series chargers are specially designed for use in the industrial and electric vehicle markets. With over 18 years of experience in manufacturing the legendary Dual ProTM charging systems, Pro Charging Systems chargers have become known as the name in charging technologies. We pride ourselves on the performance and versatility of our products and our outstanding customer service. We are proud that these safe, reliable, and efficient battery chargers are made in the USA.

Battery Charging System Designed for the Demands of Recreational and Industrial Use

• The ”Green” Charger: Totally “Repairable” Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Water Resistant

May be used in many types of sporting applications including: Golf Carts, Lift Trucks,
Scrubbers, Electric Utility Vehicles, Lawn Equipment, Industrial Signs...

Features of the Eagle Performance Series Portable Battery Chargers:

• For use with Lead Acid (Wet/AGM) batteries
• Easily reconfigured for Gelled Electrolyte batteries
• Battery type LED indicator
• Designed for tough duty applications
• Dependable, rugged construction
• Exclusive temperature compensation
• Water resistant
• Fully automatic with float maintenance
• Reverse polarity spark free operation
• Return to charge maintenance mode
• Exclusive on board diagnostics
• High visibility, easy to read charge indicators
• Fan cooled
• Optional “Universal” A/C input

i2412	12 Amps	5.5"H x 7.0"W x 8.0L	18lbs.	24V
i3612	12 Amps	5.5"H x 7.0"W x 8.0L	18lbs	36V
i4809	9 Amps	5.5"H x 7.0"W x 8.0L	18lbs	48V
i2425	25 Amps	5.6"H x 8.5" W x 10.9" L	28lbs	24V
i3625	25 Amps	5.6"H x 8.5" W x  10.9" L	28lbs	36V
i4818	18 Amps	5.6"H x 8.5" W x 10.9" L	28lbs	48V

i3612     12 Amps     5.5”H x 7.0”W x 8.0”L     18 lbs.     36V Battery Charger

Eagle Performance Series chargers are specially designed for use in the industrial and electric vehicle markets. With over 18 years of experience in manufacturing the legendary Dual ProTM charging systems, Pro Charging Systems chargers have become known as the name in charging technologies. We pride ourselves on the performance and versatility of our products and our outstanding customer service. We are proud that these safe, reliable, and efficient battery chargers are made in the USA.

Battery Charging System Designed for the Demands of Recreational and Industrial Use

• The ”Green” Charger: Totally “Repairable” Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Water Resistant

May be used in many types of sporting applications including: Golf Carts, Lift Trucks,
Scrubbers, Electric Utility Vehicles, Lawn Equipment, Industrial Signs...

Features of the Eagle Performance Series Portable Battery Chargers:

• For use with Lead Acid (Wet/AGM) batteries
• Easily reconfigured for Gelled Electrolyte batteries
• Battery type LED indicator
• Designed for tough duty applications
• Dependable, rugged construction
• Exclusive temperature compensation
• Water resistant
• Fully automatic with float maintenance
• Reverse polarity spark free operation
• Return to charge maintenance mode
• Exclusive on board diagnostics
• High visibility, easy to read charge indicators
• Fan cooled
• Optional “Universal” A/C input

i2412	12 Amps	5.5"H x 7.0"W x 8.0L	18lbs.	24V
i3612	12 Amps	5.5"H x 7.0"W x 8.0L	18lbs	36V
i4809	9 Amps	5.5"H x 7.0"W x 8.0L	18lbs	48V
i2425	25 Amps	5.6"H x 8.5" W x 10.9" L	28lbs	24V
i3625	25 Amps	5.6"H x 8.5" W x  10.9" L	28lbs	36V
i4818	18 Amps	5.6"H x 8.5" W x 10.9" L	28lbs	48V

i4818     18 Amps     5.6”H x 8.5”W x 10.9”L    28 lbs.     48V Battery Charger

Eagle Performance Series chargers are specially designed for use in the industrial and electric vehicle markets. With over 18 years of experience in manufacturing the legendary Dual ProTM charging systems, Pro Charging Systems chargers have become known as the name in charging technologies. We pride ourselves on the performance and versatility of our products and our outstanding customer service. We are proud that these safe, reliable, and efficient battery chargers are made in the USA.

Battery Charging System Designed for the Demands of Recreational and Industrial Use

• The ”Green” Charger: Totally “Repairable” Not a Throw-Away
• Unmatched Performance, Reliability, Safety and Quality
• TROUBLE FREE—Just Plug It In and Forget It!
• Join Over 750,000 of Our Satisfied Customers!
• Fully Automatic and Water Resistant

May be used in many types of sporting applications including: Golf Carts, Lift Trucks,
Scrubbers, Electric Utility Vehicles, Lawn Equipment, Industrial Signs...

Features of the Eagle Performance Series Portable Battery Chargers:

• For use with Lead Acid (Wet/AGM) batteries
• Easily reconfigured for Gelled Electrolyte batteries
• Battery type LED indicator
• Designed for tough duty applications
• Dependable, rugged construction
• Exclusive temperature compensation
• Water resistant
• Fully automatic with float maintenance
• Reverse polarity spark free operation
• Return to charge maintenance mode
• Exclusive on board diagnostics
• High visibility, easy to read charge indicators
• Fan cooled
• Optional “Universal” A/C input

i2412	12 Amps	5.5"H x 7.0"W x 8.0L	18lbs.	24V
i3612	12 Amps	5.5"H x 7.0"W x 8.0L	18lbs	36V
i4809	9 Amps	5.5"H x 7.0"W x 8.0L	18lbs	48V
i2425	25 Amps	5.6"H x 8.5" W x 10.9" L	28lbs	24V
i3625	25 Amps	5.6"H x 8.5" W x  10.9" L	28lbs	36V
i4818	18 Amps	5.6"H x 8.5" W x 10.9" L	28lbs	48V